Canique Climat Pro can read temperature and humidity from an external wired sensor and transmit this data wirelessly to a base station.

You additionally need either

a) a Canique Gateway (base station) or

b) a Raspberry Pi + a Canique Radio Hat (base station)

to use this device.

Compatibility

Compatible with:

• Measuring probe for temperature and humidity
• Measuring PCB for air temperature and humidity without enclosure

Specs

• Frequency band: 868 MHz
• Range: up to 400 meters without obstacles
• Hardware Revision: 1.1.x
• Battery life time: 10-20 years
• Measurement/Transmission interval: 30 seconds (changeable upon request)
• PCB dimension: 84 x 25 mm
• Drill hole size for screws: M2

Screw terminal

• 4 pin terminal for I2C interface with VCC, GND, SDA, SCL
• integrated 2k pullup resistors for SDA/SCL
• supports wires with AWG 26-18
• supports 4-5 mm stripped wires
• 2.54mm pitch
• M1.6 screws
• supports up to 2m cable length (max 400pF)

Battery

The battery (1 AA battery) is not included, but can be ordered separately in our shop:

• Energizer Industrial LR06 Batterie: 10 years shelf life
• Energizer Ultimate Lithium Batterie: 20 years shelf life

What you get

• Canique Climat Pro with installed internal antenna and screw terminal