Canique Radio Hat for Raspberry Pi turns your Raspberry Pi into a bridge between Canique Sensors and your local network / the internet.

It has the same functionality as the Canique Gateway, but needs a Raspberry Pi to work with.

Canique Radio Hat comes with:

• an integrated serial interface to connect to your Raspberry Pi and forward incoming messages to it
• an integrated battery powered real-time clock to keep track of the time even if your Raspberry Pi is unpowered
• free access to Canique Cloud so that you can view your sensor data/charts via cockpit.canique.com in any webbrowser anywhere in the world

Specifications:

• <0.1W power consumption
• Size: 65 x 30.5 mm
• 868 MHz frequency band
• u.FL antenna connector
• CR2032 battery holder on the back side
• 1 green TX, 1 amber RX LED to show radio activity
• compatible with Raspberry Pi 2/3/4/Zero
• Learn more about Radio Hat
• Setup instructions for Raspberry Pi on Github

What you get:

• Canique Radio Hat PCB with soldered 40 pin header
• a u.FL to SMA adapter cable and an external ~11cm 868MHz antenna
• Login Data for cockpit.canique.com
• optional: Panasonic CR2032 battery